Ad-Hoc Network Creator provides you with a Windows 8 utility to make it easier for you to wirelessly connect to your mobile devices through the use of your wireless network adapter. This way, you can also quickly and easily establish an ad-hoc network between two computers.
First things first, ad-hoc networks refer to infrastructure-less wireless networks, with no trace of another network equipment but the actual computers or other mobile devices presenting wireless capabilities. This means no wireless router or any other similar equipment. This is also called a peer-to-peer connection, as the devices are directly connected to each other, through their very own technology.
Within such setups, you have to make sure that the connected devices are fairly close to each other and that other interferences are as minimized as possible. Moreover, ad-hoc networks offer little if no security at all, pretty weak signal strength as well as slower speeds than what an infrastructure wireless network would be able to provide.
Nonetheless, there are many occasions when all of the above just do not matter as an ad-hoc wireless connection between two devices is all you need in order to exchange files and even share an Internet connection. While Windows should be enough to do that, Ad-Hoc Network Creator offers a far more simplistic approach. With this particular piece of software, all you have to do is make sure your wireless network adapter is on, open the program, enter the SSID (Service Set Identifier) of your very own choice and the corresponding password and that’s it.
Furthermore, using Ad-Hoc Network Creator you can also share the Internet connection from your wired network card through the established ad-hoc network. While this cannot be done within Ad-Hoc Network Creator, you can access the ‘Properties’ window of your LAN connection adapter, go to ‘Sharing’ tab section and tick the first option, select the appropriate home networking connection (the one virtually created by the application) and click ‘OK’.
This would not be possible if your LAN connection gets its IP address as well as the other details from a DHCP server; however, with Ad-Hoc Network Creator, you can accomplish that quite easily. All in all, Ad-Hoc Network Creator is not the best software for this type of job, but, with some thought put in it and intuition, it can prove to be a very helpful companion.
Ad-Hoc Network Creator Crack+
Ad-Hoc Network Creator Windows 8 is a small utility to easily create an Ad-Hoc network (infrastructure-less) between two computers and do so easily. This way, you can simply set up a local network for file sharing, internet sharing and printing (via local printing drivers) with no need to install a router or change your existing network settings. Both Windows 8 and Windows 7 will support this feature.
Ad-Hoc Network Creator is a part of Ad-Hoc Network Creator Windows 8. This small utility will create a new Ad-Hoc network and make sure that it is easy to create and use. To create an ad-hoc network, simply:
Enter the name of the ad-hoc network
Enter the password to the ad-hoc network, if needed
Select from the list the computer that will act as the Ad-Hoc router
Select an ad-hoc destination from the list of computers (accepted computers)
If no computers are selected, the program will try to find the computer that has an ad-hoc connection available
The program will automatically find out the name of the ad-hoc interface if no computer is selected, and will add it to the list of computers in the ad-hoc network.
If no ad-hoc computers are selected, the program will prompt for the name of the ad-hoc network.
After entering the name of the ad-hoc network, select the Computer that acts as Ad-hoc router.
Select an ad-hoc destination from the list of computers, or if you want, you can choose to add the ad-hoc destination and set it as the Ad-Hoc router automatically.
After making the selections, the program will create an ad-hoc network.
Ad-Hoc Network Creator Features:
Simple to use for setup
The option of creating an ad-hoc network is located in the ‘Start’ menu under Settings > Network and Sharing Center > Network and Sharing Center. Simply click on the ‘Set Up New Ad-Hoc Network’, enter your name and password for the ad-hoc network and click ‘Next’.
As for configuration, Ad-Hoc Network Creator has a few simple controls that allow for the setup of ad-hoc networks. There is no easy-to-follow wizard, no asking for user details like SSN or phone number and no extraneous
Ad-Hoc Network Creator Activation PC/Windows
Ad-Hoc Network Creator Cracked 2022 Latest Version is a simple and easy to use utility for ad-hoc networks from Microsoft. It allows you to turn your notebook into a Wi-Fi hotspot for your friends and family, by sharing the Internet connection from the network adapter.
Easy to setup and use even in the most difficult conditions.
Easily share the connection from your wired network adapter to an ad-hoc network.
The connection is not routed, through the use of any router device.
No network password is needed to connect to the ad-hoc network.
Network resources like disks and printers can be shared through the ad-hoc network.
No IP address and computer name is required to connect to the ad-hoc network.
You can get an ad-hoc network connection only with a configurable SSID and a password. By default, the connection name for the ad-hoc network is given as ‘Windows 7 Network (your SSID)’. You can change this default name.
You can assign a drive letter to your ad-hoc network connection using ‘Connect to (a drive letter)’ under the ‘shared disk’ and ‘shared printer’ options.
Automatically turn off the wireless connection when you move out of the range of the ad-hoc network.
Get a detailed and informative status report at the end of the connection.
Installing the software:
You can download the files from the link above.
You need to unzip the downloaded file, move it to a folder where you can read and write.
Run the setup.exe file and follow the instructions.
Run the program from your system tray.
In the first time, you need to enter the SSID as well as the password of the ad-hoc network.
You can now access the shared network resources from any other computer through your ad-hoc network connection.
You can change the settings of this program by going to the ‘Change Settings’ from the program menu.
What’s New in Version 1.05.01:
Fixed a minor issue in the program
Download Cracked Ad-Hoc Network Creator With Keygen
Ad-Hoc Network Creator
Ad-Hoc Network Creator is a utility application which enables you to create free ad-hoc wireless networks and share a wired network connection with the created networks. Through this application, you can create ad-hoc networks without using any Internet connection and without a router or other infrastructure. After the ad-hoc network is created, you can easily connect your mobile devices to this network, thus sharing files, surfing the Internet and so on, with your friends or family. This application is useful in a few situations, such as if you have a laptop but no access to a Wi-Fi hotspot, if you are far away from your router or if the signal from your router is not stable enough.
+ Shift = Go to Network Settings
+ Fn = Go to Network Settings (Alt+Fn)
+ CTRL = Show or hide the Ad-Hoc Network List
Ad-Hoc Network Creator
The app can be downloaded from our Windows Phone Store right here.
5.JumpCloud for Windows Phone is a free application that is designed to let your Windows Phone know where you are right now, enabling you to share your current location information with any of your friends or associates. This application also offers the ability to provide you with a wallpaper of your current location, or the last location you have been to.
JumpCloud is a free app for Windows Phone that helps you share your location with your friends. To do this, simply open the app, enter a username and password for your web service, and click “Share Location”. Your friends will then see where you are on a map, along with any additional information you wish to share. You can even manually enter a location address. You can share your current location, or any address that has been previously entered into the application.
The service has some pretty cool features, and is in large part similar to Latitude, an offering that runs on the same web service. First, you will be able to view your friend’s locations on a map. This can be a great way to tell someone where you are, but it can also be a great way to help someone find you. You can even generate an interactive map to help your friends find you. You can send each other messages, and see your friends’ photos. All of the information is accessible through the right sidebar, which can be expanded to view the full profile of your friend, along with pictures and
What’s New in the Ad-Hoc Network Creator?
With Ad-Hoc Network Creator, the use of an ad-hoc network is extremely easy. If you are using Windows 8, you can start with a pre-configured ad-hoc network to share and share your internet connection. The pre-configured ad-hoc network is shared to multiple users, so you can have several users to access your internet at the same time.
This article will guide you through the setup of your ad-hoc network so you can share your internet connection with anyone. If you are having difficulty with the setup of your ad-hoc network, please make sure you read our full guide before using this software:
How to connect to an ad-hoc network in Windows 8
The features of this software include:
Configure your ad-hoc network settings
All the configuration needs to be done in the “Advanced” tab so we will go through it step-by-step.
1. Log into the “Advanced” tab under the name of your computer and copy the IP address and name of your computer.
2. Click on “Add IP Address” to enter the IP address you copied in step 1 above.
3. Add the Shared Device Name in the Shared Device box. If you are sharing your internet connection to a guest, please choose “Guest” instead of your computer’s name.
4. Click on “Advanced” tab then click on “Default Ad-Hoc Network Settings” to apply the settings to all ad-hoc networks.
5. Click on the “Create” button to create the ad-hoc network.
6. You will see a confirmation screen that the ad-hoc network was created.
7. If you click on the “Allow” button, the ad-hoc network will be accessible from the settings of your wired connection
8. If you click on the “Allow” button, the ad-hoc network will be accessible from the settings of your wired connection.
Ad-hoc Network Creator Review:
As mentioned in the previous paragraph, this program is very simple to use. Also, the results are amazing. Let’s take a look at some of the features of Ad-Hoc Network Creator.
Ad-Hoc Network Creator Free Download Program has been tested thoroughly and we are assured that there are no features in this software that are outdated
The official minimum requirements are as follows:
OS: Windows 7
CPU: Dual Core 2 GHz or faster
Memory: 2GB RAM
DirectX: Version 9.0c
Network: Broadband Internet connection
I wrote this guide to help fellow users play No Man’s Sky, a large open world space-faring exploration game. It will not help new players, or the hard-core, because the game is very difficult and unforgiving. However, if you are looking to just